News – Page 29 – Blettner Engineering

Precision Pallet Conveyors by mk North America

Posted on 03/17/2011 at 7:24 pm.

rnrnrnrnrnrnrnrnrnrnrnrnrnrn

rnrnrnrnrnrnrnrnrnrn

rnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrn

Precision Pallet Conveyors

Quality, Productivity and Flexibility! nnrn

The mk Modular Pallet Conveyors are designed to improve manufacturing productivity and product quality while rnallowing for maximum assembly flexibility – making mk’s pallet conveyors the prime option for a conveyor that meets all the needs of your specific automation project and the pallet you are transporting. nnrn

With your choice of four different conveying styles; belt, timing belt, chain or accumulating roller chain, mk offers the broadest line-up of non-synchronous assembly conveyors available anywhere. Combined with an extensive range of rnpositioning and transfer modules, elevators and pallet options, the mk system offers almost endless possibilities. nnrn

With mk pallet conveyors you have the freedom to select the configuration best suited for your layout and production process. Construct and combine our different conveyor styles into: over/under, recirculating, in-line or parallel lines. All systems can be easily expanded, re-configured or relocated as your needs change. nnrn

Whatever your application, our application engineers have likely worked on it. They’ll carefully review your requirements – cycle time, payload, floor space, process flow – and devise the best conveyor rnlayout to suit them.nnrn

rnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrnrn

Pallet Size Range:	200 x 200mm to 2000 x rn2000mm
Pallet Load Capacity:	Up to 500 lbs
Transport Media:	Flat belt, timing belt, roller rnchain, accumulating roller chain
Transport Rate:	Up to 100 ft/min
Repeatability:	+/- 0.05mm (.002″)

nnrnnnrn

rnrnrnrnrnrnrnrnrnrnrn

rn rnDownload: rn	rn rnProduct Overview Brochure (pdf – 1MB) rn
rn rnLearn more: rn	rn http://www.mknorthamerica.com/conveyors/types/multi-lane-conveyors.htmlnnrn rn

rnnn nnrn

rnIdeal for Rough Environments

rnnnChain conveyor KTF-P 2010 serves as the basic system component for the manufacturer of single or multiple strand material handling systems. Chains run on our low friction wear strips, thus increasing the life span of the chains and allowing for the allocation of heavily loaded pallets. They are designed for high load capacity, making it the best choice for a heavy-duty rnapplication.nnrnnnSpecificationsnnrnnnnn

Frame: 20×100 mm structural aluminum profile rnnnnn
Width: 50 mm lanernnnnn
Length: 500 mm – 10,000 mmrnnnnn
Load: Up to 280 kgrnnnnn
Speed: Up to 60 mpmrnnnnn
Attachment links are possible for custom fixtured applications

nnnnrnnn nnrn

rnnnnnrn

rnnnIdeal for Pallet Accumulationnn

Low back pressure accumulating chain conveyor SRF-P 2010 is designed for the construction of medium and heavy-duty pallet handling systems. The free running load rollers ensure quiet operation during project accumulation, likewise enhancing and improving the quality of your work space. nnrnrnnnSpecificationsnnrnnnnn

Frame: 50×100 mm structural aluminum profile rnnnnn
Width: 50 mm lanernnnnn
Length: 500 mm – 10,000 mmrnnnnn
Load: Up to 400 kgrnnnnn
Speed: Up to 60 mpm (150 rnfpm)rn

nnnnrn

rnnnrn

Ideal for Pallet Transport and AccumulationnnrnThe roller chain conveyor system SRF-P 2012 is designed for the transport and accumulation of loads up to 300 kg, or 660 lbs. Examples of typical applications include product transfers between work stations or the accumulation of products between processes. T-slots on three sides offer plenty of options for mounting stops, side rails, sensors, stands, etc, further allowing you to make the conveyor a perfect fit for your specific application, enabling you to easily and simply adjust and reconfigure as necessary.nnrnrnnnSpecificationsnnrnnnnn

Frame: 60 x 135 mm structural aluminum profilennrnnnnn
Width: 200 – 2000 mm rnnnnn
Length: 1000 mm – 10,000 mmrnnnnn
Load: Up to 600 kgrnnnnn
Speed: Up to 30 mpm (100 fpm)nnrnrn

nnnnrnnnnnrn

rnnn

nnrn

IAI America Newsfeed on the Japan Earthquake and Tsunami

Posted on 03/16/2011 at 2:40 pm.

Written by Craig Frazee

Posted by: IAI America rnon: 15 Mar 2011 03:42 PM PDTrnrnWe would like to express our deepest condolences to the victims of the earthquake and tsunami in north eastern Japan.rnrnWe have received so many warm messages about the recent earthquake. We thank you for your concern. rnrnWe are happy to report at this time that all of our management, employees and their families are safe and accounted for. Our head office and factory have not received any damage.rnrnWe are investigating other impacts we may experience from our suppliers and the transportation situation in Japan. We will update information @ http://www.iaiquality.com once we learn any further details.rnrnIf you have any questions please feel free to contact our offices.

New SCON-CA + RA13R with Force Control

Posted on 03/04/2011 at 9:18 pm.

Written by Craig Frazee

rn nnrn New SCON-CA and RCSC2-RA13R FORCE CONTROLnnrnnnrn

rnnnnn

Force control capabilitynnrn 10~100% of rated capacitynnrn force sensor accuracy is 1.0% of rated capacitynnrn

nnnnrnnnnn

Automatic offset adjustment for the force sensornnrn

nnnnrnnnnn

Push profile monitoring

nnnnrn

RCSC2-RA13R with Force Control 3D Exploded

nnrn

Fieldbus: More than just an I/O replacement!nnrn nnrn

Additional Features:	Vibration Control
	PC auto tuning (for Vibration Control)
	Force Control (Load Cell)->Available

rnnnrn

rn New SCON CC-Link up to nnrn 400W version

rn Green Automation from IAI with Electric Actuators nnrnnnrnnnrnnnrnnnrn

SCHMIDT Technology will be conducting a one hour educational Webinarnnon March 9, 2011.

Posted on 02/03/2011 at 7:41 pm.

Written by Craig Frazee

SCHMIDT Technology will be conducting a one hour educational Webinar on March 9, 2011. This webinar will discuss the differences in press types on the market, how the right press selection can save you money and how safety applies to presses.rn

rnnnThis SCHMIDT Webinar will consist of two sections:nnrnnnnn

Select the right pressnnrn Whether you’re performing a simple assembly or dealing with an intricate process that involves demanding tolerances, choosing the most appropriate solution to meet your need is not easy, but important.nnrnnnrn No matter if you have a Pin press, Insertion, Extraction, Assembly & snap fit, Bending & forming, Compliant pin press fit, Crimping, staking, Flaring, swaging, Riveting, joining, Punching, blanking, Marking, or Cutting application, in this Webinar you can learn how to quickly get from your immediate need to a sensible solution.nnrnnnrn

nnnnrnnnnn

Choose a SAFE control!

nnnnrn

nnnnrnnnnn

How much safety do you need?

nnnnrnnnnn

Are all the safety devices equal?

nnnnrnnnnn

How can your operator be safe?

nnnnrnnnnn

Is your current press station an accident waiting to happen?

nnnnrnnnnn

How can you reduce risk?

nnnnrnnnnn

How much safety does a control provide you?

nnnnrnnnnn

Do you need safety devices that meet global standards?

nnnnrn

New Weber SLIM-09 Controler

Posted on 01/07/2011 at 3:53 pm.

Written by Craig Frazee

Weber USA is proud to announce an update to the successful SLIM-08 controller which has been available for some time. The new updated system brings all the benefits of the older 08 control package but with many upgraded features: nnrn

nnrn

The SLIM09 is also part of the new ECO-TORK product range and is designed to allow replacement of expensive to operate, noisy and maintenance intensive pneumatic prime movers such as one-shot screwdrivers, air motors and other devices requiring air and oil. nnrn

The system has a clean new look while maintaining backwards compatibility and high reliability for use in high cycle fastening applications. nnrn

nnrn

The new form factor also now offers either monochrome or full color HMI (human machine interface) and provides even more feedback to the operator than was available from the older 08 product line. nnrn

nnrn

These ‘customer driven’ features bring a new level of capability to the controller which now has higher performance output from the motor packages, higher cycle capability, lower ‘current’ usage (energy savings) and has the ability to accommodate various future upgrades due to the capability of internal components used. See your Weber Sales Manager for more details on this future expandability. nnrn

nnrn

rn The new SLIM09 products underlying “Value Proposition”, is the bold new features, the advanced functionality and a cleaner package all available at the same price as the old 08 system for the first 6 month from launch Date ( November 1st 2010 ). rnnnrn

rn nnrn

rnFeatures: nnrn

rn nnrn

rn3rn – Powerful ‘high cycle’ servo motor capacities available nnrn

rn4 – Gearbox combinations for various Torque and speed ranges nnrn

rnNew HMI Touch Screen interaction with system settings, strategies and variables changes. nnrn

rnBackwards compatible with SLIM08 control architecture nnrn

rn220V AC standard with 110V AC optional for greater output torque/speed and less current usage. nnrn

rnExtended I/O capability