Ultra Compact SCARA Robot with Mini Electric Gripper

Posted on 08/09/2011 at 2:15 pm.

Ultra Compact SCARA Robot with Mini Electric Gripper

rnrn rn rn rn rn rn rnnnThis display unit is a ROBO Cylinder® + compact electric gripper installed on a small SCARA robot, used to move work parts between the slide table and index table.nnrnnnThis gripper, weighing just 200 g, provides a stroke as long as 8 mm despite its compact body and also produces a high gripping force of up to 14 N.nnrnnnYou can also design the gripping mechanism as you like by selecting a lever type, instead of the slide type as shown here.nnrnrnnnFor the rotary actuator used for the index table, you can select a desired model from our line up of small, medium and large rotary actuators.

IK Series Multi-axes Unit Video

Posted on 08/05/2011 at 5:13 pm.

Written by Craig Frazee

rn rn rn rn rn rn rnnnThis display unit uses a ROBO Cylinder? combination unit and IA kit to draw text, lines and graphics on the pen tablet.nnrnnnThis IA kit comes with all necessary parts including cable bearers, brackets and can be easily assembled. We can also ship the kit pre-assembled at our factory.nnrnnnThe IA kit is much more affordable and requires a significantly shorter lead time compared to conventional Cartesian robots.nnrnnnLearn more about the IK Series Multi-axes Cartesian system.nnrnnnrn

NEW – ROBO Cylinder® General Catalog (electronic version only)

Posted on 06/06/2011 at 2:17 pm.

Written by Craig Frazee

rnnn

nnrnnnROBO Cylinder® General Catalog (10 sections)nnrnnnCatalog #: CJ0159-2A-UST-1-0511nnrn Pages: 749nnrnnnROBO Cylinders® are the energy efficient solution to your pneumatic system complications. The ROBO Cylinder® electric cylinders achieve easy operation, high functionality, energy-savings and low costs. Offering a wide lineup, they help you resolve various problems you are facing in system design.nnrnnnDownload a Specific ROBO Cylinder Catalog Sectionnnrnnn1 Overview Preface (3.5 MB)nnrn 2 Slider types (18 MB)nnrn 3 Rod types (20.3 MB)nnrn 4 Table, Arm, and Flat types (10.3 MB)nnrn 5 Gripper and Rotary types (5.5 MB)nnrn 6 Linear Servo types (4 MB)nnrn 7 Cleanroom types (6.6 MB)nnrn 8 Dust and Splash-Proof types (3 MB)nnrn 9 Controllers (12 MB)nnrn 10 Technical Reference and Index (8.1 MB)nnrn

LCP-10/ LCM4 Handheld Automatic Screwdriving System

Posted on 05/27/2011 at 2:29 pm.

Written by Craig Frazee

The LCP-10/ LCM4 Handheld Automatic Screwdriving System shown below is designed to substantially boost the productivity of your operators while inserting a screw for part assembly to a specific and repeatable torque. This automatic blowfed handheld screwdriving tool is a lightweight device for rapidly installing fasteners. The operator simply pushes down on the tool and the bit advances forward to install the fastener. rnrn

rnrnThe Weber LCP-10 handheld tool has a telescoping internal screwdriver bit. This means the operator gently pushes down on the tool to advance the bit thru the screw aligning jaws and engages the air motor to drive the screw into the part. When the screw reaches the specified torque the shut-off clutch in the air motor turns the motor off. The operator releases the gentle pressure and allows the gun to return to a home position and the next screw is feed. This allows fast efficient increases in productivity with no learning curve. The system does the majority of the work for the operator, reducing the effort required.rnrnThe LCM4 screwfeed system utilizes the latest in material and controls advances to give you the fastest, most reliable feeder available. The Polycast bowl offers quiet and extremely durable operation comparable with stainless steel longevity with less than half the noise. Webers escapement design is renowned for its quality and reliability. It has earned this reputation in some of the toughest “three shift” environments for over 50 years now.rnrnrnTo learn more about this innovative tool contact any one of the Blettner Engineering Sales Team and we will be happy to assit you with your application

MECCO Marking & Traceability

Posted on 05/02/2011 at 4:37 pm.

Written by Craig Frazee

Direct Part MarkingnnLaser Marking & Engraving – Dot Peen Marking

rnnnMECCO Marking & Traceability is a leader in direct part marking, laser marking, laser engraving and dot peen machines for traceability and part verification. MECCO’s innovative solutions enable clients to permanently mark and trace just about any part—especially ones that must withstand the harshest environments and processes. nnrn

MECCO’s full range of cost-effective direct part, laser marking and dot peen marking technologies reflects the diverse applications of our clients. They can be found in workstations, portable and handheld part marking devices, and integrated production/assembly lines. These technologies include Laser Marking and Dot Peen Marking.