Laser Marking Demonstration at your location

Posted on 04/11/2012 at 12:58 pm.

nnrn

Schedule your Laser Demonnrn

Today for the Week of 4/23/2012nnrn

Mecco Marking & Traceability nnrn

Mecco Marking and Traceability will be conducting laser marking system demonstrations in your area. We will have one of our table top air cooled fiber laser marking systems available for a demonstration at your location. nnrn

Mecco Standard Marking Enclosure nnrn

This is a great opportunity for you to test laser mark on some of your parts and learn about our laser marking software.nnrn

Mecco Laser Marking Software nnrn

Please let us know if you would like to schedule a demonstration for your company so we can best accommodate everyone.nnrn

nnnnrn

nnrn

Dale Blettner

rnnnCentral &nnSouthern Indianannrnnnnn

Office: 317-835-7168

nnnnrnnnnn

Fax: 317-835-7158

nnnnrnnnnn

Cell: 317-432-1514

nnnnrnnnnn

dale@blettnerinc.com

nnnnrn

Trent Blettner

rnnnSouthern IndianannKentuckynnSouthwest Ohionnrnnnnn

Cell: 317-370-1319

nnnnrnnnnn

Fax: 317-862-9682

nnnnrnnnnn

trent@blettnerinc.com

nnnnrn

Craig Frazee

rnnnNorthern Indianannrnnnnn

Cell: 260-726-0884

nnnnrnnnnn

Fax: 317-536-3179

nnnnrnnnnn

cfrazee@blettnerinc.com

nnnnrn

nnrn

nnnnrn

nnrn

rn nnrn

Mecco provides lasers in both CO₂ and YAG wavelengths in several power levels and can manufacture workstations to meet most needs including automation and production line integration.nnrn

If you’re not able to make an appointment during this time you can always send us some of your parts to the address at the bottom of this e-mail for free application test marking or we can try to schedule you for another visit.nnrn

Mecco has been in the industrial marking business since 1889 and sells a variety of Dot-peen and Laser marking systems. nnrn

For more information contact one of the Blettner Engineering Teamnnrn

or visit Mecco Marking & Traceability on the web! nnhttp://www.mecco.comnn nnrn

rnnn

IAI SCON-CA Controllers

Posted on 03/23/2012 at 7:18 pm.

Written by Craig Frazee

rnnn nnrn rn

rnnn

nnrn

rnnnSCON-CA Catalog (2.5 MB)nnrnnnCatalog #: CJ0173-1A-UST-1-0312nnrnnnPages: 16nnSCON servo controllers have become even more advanced! The actuator’s load capacity has been increased with offboard tuning. It is a function to increase the acceleration/deceleration when the load mass is small, or decrease the acceleration/deceleration when the load mass is large, so that the actuator is set to operate optimally for the given load mass—This is just one of the new functions.nnrnnnClick to download the PDF Catalog.nnrn

Flat Finish Extrusion

Posted on 02/28/2012 at 3:27 pm.

Written by Craig Frazee

Flat Finish Extrusionnnrn

Many customers are requesting that mk North America incorporate flat finish profiles into their designs due to their cleaner look, lack of areas for debris to collect and build up and their overall finish. The closed T-slots also make the frame appear stronger because of their solid appearance. The response from customers has been overwhelmingly positive and the flat finish profiles are rapidly becoming some of our top selling shapes.

Traditionally used by medical companies for their cleanliness, we are seeing a trend of many manufacturers switching to flat finish profile shapes. In addition to the medical companies, we are seeing orders from pharmaceutical, nutraceutical, consumer packaged goods and electronics companies for flat finish profiles as well. Click the photo above to see all these shapes, including several new shapes that are now stocked at mk. This link includes a PDF that can be emailed to your current customers or accounts that you are targeting. Please feel free to contact us with any questions.

This picture is an enclosure covering an mk conveyor made with the mk flat finish or smooth profiles, as some of our competitors have labeled them, with a heavy duty handle and hinge. The hinge also features an integrated, schmerzal, hinged safety switch and polycarbonate panel mounted in the T-slot.

This picture shows a typical right angle connection made with a non-visible, internal tension plug fastener, which makes the connection look seamless. Also featured are the mk end caps, used for creating a finished look on the profile ends. Panel mounting is achieved using the new mk part B34.01.003, which is similar to the old mk part mk 2552, but which now features a cover for the hardware. It also prevents dust and debris from having an area to collect in. Easy panel removal is still enabled by using a wrench to remove the screws.

This picture reflects a series of identical rolling carts for inspection instruments, which are made from the flat finish profiles. These carts feature 75 mm total lock casters and a base shelf made of lab resin material. Lab resin was chosen for its high quality look, machine ability and dense mechanical properties.

NEW ERC3 Series Improvements

Posted on 02/25/2012 at 5:46 pm.

Written by Craig Frazee

ERC3 Series Catalog

rnrn rn

rnrn

rnrnrn

rnnnERC3 Series Catalog (4.5 MB)nnrnnnrnTransform your factory with the efficiency-improving, space-saving ERC3 ROBO Cylinder® — Saving space with built-in controller / Supporting wide-ranging operations with longer strokes / Payloads and speeds have been increased by 1.5 times / Most affordable in our ROBO Cylinder® series!nnrnnnClick to download the PDF Catalog.

New IAI S & M sizes added to the SSPA Series

Posted on 02/20/2012 at 3:11 pm.

Written by Craig Frazee

New S & M sizes added to the SSPA Series

rnrn

rnnnISB/SSPA Series Catalog (9.3 MB)nnrnnnCatalog #: CJ0172-2A-UST-1-0212nnrnPages: 60nnrnA major revamp of the single-axis robot IS series with improvements all around—from preciseness, rigidity and payload capacity to speed and acceleration/deceleration.nnrnnnClick to download the PDF Catalog.