nnrnnnrn

Cleanroom Type and Dust-proof Type Now Available

rnnnCleanroom type and Dust-proof type are now added to the lineup of the two-fingered gripper RCP2-GRS/GRM and three-fingered gripper RCP2-GR3SS/GR3SM seriesnnrnnnrnnnLearn more about the RCP2CR-GR and RCP2W-GR.

May 26, 2014

rnnnrnnnrn

Infratrol Ships Ovens for Stabilizing Temperature of Plastic Extrusions

rnnnnnrnnnnn

rnnnnn
• To allow temperature stabilization of continuous billets of plastics

nnnnrn

nnnnrnnnrnnnnn

rnnnnn
• 250º F Operating, 400º F Maximum

nnnnrn

nnnnrnnnrnnnnn

rnnnnn
• Overall oven size: 80’ long x 7’6” high

nnnnrn

nnnnrnnnrnnnnn

rnnnnn
• Maximum product size: 18” w x 6” h

nnnnrn

nnnnrnnnrnnnnn

rnnnnn
• Product load: 80 lbs per foot

nnnnrn

nnnnrnnnrnnnnn

rnnnnn
• Non-powered steel roller conveyor; machine fed and unloaded

nnnnrn

nnnnrnnnrn

Special Features

rnnnnnnnrnnnrnnnAccess Doors – 16 top access hinged doors with counterweighted lift design allow ease of operation.nnrnnnnnrnnnrnnnCirculation Ducts – High circulated air volume from both ends of product returned at center of each zone provides uniform temperature.nnrnnnrnnnElectrical Control – Includes NEMA rated enclosure and separate pushbutton and temperature control station. nnrnnnrnnnOven Construction – Non-settling mineral wool insulation and insulated floor keep heat transfer to outer shell at a minimum.nnrnnnrnnnnnrnnnRef #7570nnrnnnrn

Contact us to learn more

rnnnnn

May 30, 2014

rnnnrn

rn

Three Tier Rubber Hose Curing Oven Shipped to Leading Fire Hose Manufacturing Company

rnnnnnnnrnnnnn

rnnnnn
• Gas Fired Rubber Hose Curing Oven

nnnnrn

nnnnrnnnrnnnnn

rnnnnn
• For curing the internal rubber lining of a hose prior to bonding with outer-most hose material

nnnnrn

nnnnrnnnrnnnnn

rnnnnn
• 650F operating temperature, 700F max temperature

nnnnrn

nnnnrnnnrnnnnn

rnnnnn
• 1.5 minute dwell time

nnnnrn

nnnnrnnnrnnnnn

rnnnnn
• Overall length 77’8” including 64’ heated length

nnnnrn

nnnnrnnnrnnnnn

rnnnnn
• 100 FPM line speed

nnnnrn

nnnnrnnnrn

rn

SPECIAL FEATURESnn

rnnnnnnnrnnnnnrnnnThree Tier Conveyor – The part conveyance consists of three separate conveyor levels.  The extruded hose material is loaded at one end of the top level, passes through the top, middle, and bottom conveyor for the proper curing time.nnrnnnrnnnSide Access Doors – One side of the oven lined with access doors to allow for easy access to all three tiers of conveyor and allow for easier maintenance access.nnrnnnrnnnHeat-Loss Hoods – The entrance and exit ends of the oven openings contain hoods mounted above the opening.  These are designed to capture and recirculate heat lost from the end openings.nnrnnnrnnnnnrnnnCirculation Ducts – Equipped with a side air supply duct.  The one-side airflow allows for the access doors to be placed on the opposite side of the oven.nnrnnnrnnnrnnnRef #7626nnrnnnrnnnrnnnrnnnrn

Contact us to learn more

June 12, 2014

rn

rn

Oven for Drying Lubricant from Motor Rotors Shipped by Infratrol

rnnnnnrnnnnn

rnnnnn
• Electrically heated oven, 300°F Operating Temperature, 400°F Maximum Temperature

nnnnrn

nnnnrnnnrnnnnn

rnnnnn
• 16’6″ overall length, 6’6″ heated length, 5’0″ cooling by propeller fan

nnnnrn

nnnnrnnnrnnnnn

rnnnnn
• Product Information: Aluminum & Steel rotors; 5″ diameter, 5 lbs. each; 4,000 lbs. per hour through the oven

nnnnrn

nnnnrnnnrn

Special Features

rnnnPortable Oven – Oven is compact enough to be moved around the customer’s facility.  Having the equipment electrically heated makes portability easier as well. nnnnrnnnrnnnForced Air Cooling – Two 30″ diameter propeller fans mounted above the product force air onto the parts to cool them enough to be handled and unloaded by the customer.nnrnnnrnnnConveyor System – A flat wire steel belt transports the parts through the oven.  This conveyor includes a variable frequency drive (VFD) on the motor in order to easily adjust the speed, and overload protection to protect the conveyor in-case of a jam.nnrnnnTop-Down Airflow – The top air supply duct forces the heated air onto the product below.  This air supply design maximizes air impingement onto the product, ensuring the driest possible product. nnrnnnrn

rn

rn

rn

rn

rn

rn

rn

rnnnRef #7433nnrnnnrn

Contact us to learn morenn

rnnnnn

June 26, 2014

rnnnrn

Epoxy Curing Oven Supplied to Electronics Manufacturer

rnnnnnrnnnnn

rnnnnn
• For curing epoxy on electronic modules

nnnnrnnnnn

• Manually loaded, dual lane indexing chain conveyor system

nnnnrnnnnn

• Parts carried on trays

nnnnrnnnnn

• Maximum product size: 18” w x 19” l x 2.5” high

nnnnrnnnnn

• 185º F (85º C) Operating, 212º F (100º C) Maximum

nnnnrnnnnn

• Electrically heated: 48 KW on 480/3/60

nnnnrnnnnn

• Product load: 80 lbs per foot; Dwell time: 40 minutes @ 2.0 FPM

nnnnrn

nnnnrnnnrn

Special Features

rnnnnnrnnnPowered Roller Conveyor – to deliver product to the load end. Includes a pop-up transfer conveyor section at the oven exit to transfer product from the indexing oven conveyor to the powered roller conveyor.nnrnnnrnnnInsulated Walls – 3″ insulated walls with an aluminized steel exterior and interior skin within a structural steel framennrnnnrnnnAir Circulation – exhaust fan with manual and top mounted, aluminized steel air supply duct with high velocity nozzles and recirculation fan with TEFC motor.nnrnnnrnnnHeating Elements – metal sheath electric heating elements installed in the recirculation air streamnnrnnnrn

rn

rn

rn

rn

rn

rn

rn