IAI SCON-CA Controllers

Posted on 03/23/2012 at 7:18 pm.

rnnn nnrn rn

rnnn

nnrn

rnnnSCON-CA Catalog (2.5 MB)nnrnnnCatalog #: CJ0173-1A-UST-1-0312nnrnnnPages: 16nnSCON servo controllers have become even more advanced! The actuator’s load capacity has been increased with offboard tuning. It is a function to increase the acceleration/deceleration when the load mass is small, or decrease the acceleration/deceleration when the load mass is large, so that the actuator is set to operate optimally for the given load mass—This is just one of the new functions.nnrnnnClick to download the PDF Catalog.nnrn

Flat Finish Extrusion

Posted on 02/28/2012 at 3:27 pm.

Written by Craig Frazee

Flat Finish Extrusionnnrn

Many customers are requesting that mk North America incorporate flat finish profiles into their designs due to their cleaner look, lack of areas for debris to collect and build up and their overall finish. The closed T-slots also make the frame appear stronger because of their solid appearance. The response from customers has been overwhelmingly positive and the flat finish profiles are rapidly becoming some of our top selling shapes.

Traditionally used by medical companies for their cleanliness, we are seeing a trend of many manufacturers switching to flat finish profile shapes. In addition to the medical companies, we are seeing orders from pharmaceutical, nutraceutical, consumer packaged goods and electronics companies for flat finish profiles as well. Click the photo above to see all these shapes, including several new shapes that are now stocked at mk. This link includes a PDF that can be emailed to your current customers or accounts that you are targeting. Please feel free to contact us with any questions.

This picture is an enclosure covering an mk conveyor made with the mk flat finish or smooth profiles, as some of our competitors have labeled them, with a heavy duty handle and hinge. The hinge also features an integrated, schmerzal, hinged safety switch and polycarbonate panel mounted in the T-slot.

This picture shows a typical right angle connection made with a non-visible, internal tension plug fastener, which makes the connection look seamless. Also featured are the mk end caps, used for creating a finished look on the profile ends. Panel mounting is achieved using the new mk part B34.01.003, which is similar to the old mk part mk 2552, but which now features a cover for the hardware. It also prevents dust and debris from having an area to collect in. Easy panel removal is still enabled by using a wrench to remove the screws.

This picture reflects a series of identical rolling carts for inspection instruments, which are made from the flat finish profiles. These carts feature 75 mm total lock casters and a base shelf made of lab resin material. Lab resin was chosen for its high quality look, machine ability and dense mechanical properties.

NEW ERC3 Series Improvements

Posted on 02/25/2012 at 5:46 pm.

Written by Craig Frazee

ERC3 Series Catalog

rnrn rn

rnrn

rnrnrn

rnnnERC3 Series Catalog (4.5 MB)nnrnnnrnTransform your factory with the efficiency-improving, space-saving ERC3 ROBO Cylinder® — Saving space with built-in controller / Supporting wide-ranging operations with longer strokes / Payloads and speeds have been increased by 1.5 times / Most affordable in our ROBO Cylinder® series!nnrnnnClick to download the PDF Catalog.

New IAI S & M sizes added to the SSPA Series

Posted on 02/20/2012 at 3:11 pm.

Written by Craig Frazee

New S & M sizes added to the SSPA Series

rnrn

rnnnISB/SSPA Series Catalog (9.3 MB)nnrnnnCatalog #: CJ0172-2A-UST-1-0212nnrnPages: 60nnrnA major revamp of the single-axis robot IS series with improvements all around—from preciseness, rigidity and payload capacity to speed and acceleration/deceleration.nnrnnnClick to download the PDF Catalog.

mk Attachment Chain Conveyors

Posted on 02/06/2012 at 5:22 pm.

Written by Craig Frazee

Often times customers need to affix a pallet to the conveying surface in order to better handle their part. mk offers two solutions for this type of application. We offer both timing belt and chain conveyors with attachments on them.nnrn nnrn

nnrn Typically, attachment timing belt conveyors are used in light-weight applications with relatively small footprints where high precision is needed. Attachment chain conveyors are ideal for moving larger, heavy loads over great distances. nnrn nnrn

nnrn

rn To construct our attachment chain conveyor we start with out KTF-P 2010 platform. This system utilizes a standard half-inch pitch ANSI chain, which allows fixtures to be added to the chain in this division. All of the standard roller chain attachments (vertical, right angle, single side, double side, single hole, multiple hole) are available. We then remove the return channel of the 2010 extrusion to allow the modified chain to pass through free of obstruction. Other conveyor modifications, such as rounding roll holders, are done as necessary based on the application.nnrnnnrn The customer is welcome to design their own fixture or pallet to affix to the attachment chain, or they can request mk to do so.nnrnnnrn With the current greater demand for this style of conveyor and chain, attachment chains are now readily available. Thus, what used to take four or more weeks to source can now be sourced in a single week, which brings these conveyors down to a 15 to 20 business day lead-time. Making these units is not only a cost effective way to move large pallets, but a relatively quick source of custom automation as well. nnrn

nnrn