Aluminum Billet Preheat Oven Shipped to Automotive Parts Manufacturer

rnnnrnnnJanuary 19, 2015nnrnnnrnnnnn

rnnnnn
• Gas Fired Aluminum Billet Furnace for heating aluminum billets,nnwhich enter the press to be forged into pistonsnnProduction Rate: 240 to 360 parts per hour (4 to 6 parts per minute)nnOven Temperature: 850°F (950°F Maximum)nnDwell Time: 30 minutesnnProduct size: 3” diameter; 2.5” – 4” in lengthnnOverall Furnace size: 12’9” long x 11’4” wide x 12’ high

nnnnrn

nnnnrnnnrnnnSPECIAL FEATURESnnrnnnrnnnnn

rnnnnn
• Extractor Pusher & Sensor – A sensor detects a part innnplace at the oven exit and the extractor/pusher pushes thennbillets onto a transfer conveyor.

nnnnrnnnnn

• Conveyor – Vertically mounted dual strand chain conveyornnsystem runs through the entire length of the furnace.nnEquipped with SS pedestals for loading billets. 60’ overallnnlength, speed 2 FPM.

nnnnrnnnnn

• Gas Convection Equipment – Nozzle mixing type burnersnnfor wide range of turn down. Integral blower in burner providesnnair for combustion independent of air circulation within oven.nnHigh turn down ratio and 3 phase motor.

nnnnrn

nnnnrnnnrnnn